Housing material: gray cast iron or ductile iron SNL series Split plummer block housings for bearings on a cylindrical seat, with oil seals Bearing No and Locating Ring: 1320 2pcs of SR215*19.5 2320 2pcs of SR215*6.5 21320 2pcs of SR215*19.5 22320 2pcs of SR215*6.5 Weight:26.2kg
Features and benefits
Stiff housing: Housing bases are reinforced with ribs. Extra material surrounding the attachment bolt holes means that attachment bolts can be preloaded without deforming the housing base or bore. Cap and base individually marked : enabling the correct tolerance for the bearing seat. Dimples to locate accessories: Potential positions of grease fittings or condition monitoring sensors are marked by dimples, advantageous for easy and efficient upgrades. Simple mounting : Cast lines in the housing base indicate the centre of the bearing seat, important for exact alignment. Dimples indicate the positions of dowel pins, which can relieve the attachment bolts from shear forces. Mounting instructions supplied with each seal pack provide information for efficient and correct assembly.Main Dimensions Shaft Dia da: 100mm Shaft Dia db: 115mm Centre height of bearing seat(h): 140mm Overall length(a): 410mm Distance between attachment bolts(e): 350mm Foot width(b):120mm Width of attachment bolt hole(u):26mm Length of attachment bolt hole(v):32mm Foot height(c):45mm Overall height(w):271mm L:185mm L2:199mm d1:157.5mm Diameter of seal groove(d2):167.5mm j:11.5mm Width of seal groove(F):6mm Width of bearing seat(g):86mm Diameter of bearing seat(D):215mm S:M24 MOUNTING INFORMATION Recommended diameter of attachment bolts G:24 mm Recommended tightening torque for attachment bolts:665 Nm Size of cap bolts:M20x120 Tightening torque for cap bolts:200 Nm Size of eye bolt:M10
