Housing material: gray cast iron or ductile iron SN series two bolt split pillow block housing suitable for self aligning ball bearings and spherical roller bearings and adaptor sleeve mounting Bearing No.1208K,2208K,22208K Adapter Sleeve :H208,H308,HE208,HE308 Locating Ring: 2pcs of SR80X7.5 1pcs of SR80X10 Weight:2.6kgSN508 plummer block are made of Grey cast iron,it working with 22208CKBearing,1208K Bearing and 2208K bearing This kind of plummer block is easy installation, SN508 plummer block housing are robust,ready-to-mount unit that are assembled,lubricated and sealed ,with their simple and safe installation,easy alignment and reliable locking technology,they are an excellent alternative to sleeve-mounted bearing in housings SN508 plummer block enable the bearings to achieve maximum bearing service life with less need for maintenance . Applications of SN508 plummer block housing General industry: Conveyors,Roller tables,Fans and blowers Processing industry: Crushers,hammer mills,ball and rod mills,decanters,kilns Paper making equipment:dryer cans,jack ladders,chip conveyers,pumps,pulpers breast rolls,press rolls Loadability of the Housings SN Plummer Block Housings are designed for loads applied vertically to the bridging surface. In these instances the permissible load is determined by the load rating of fitted bearing. Should loads be applied at other angles, checks should be carried out to determine whether they are still valid for the housing, the housing connecting bolts and the mounting bolts. housings from material GGG 40 & GS 45.Bolts to strength class 8.8 are supplied as standard for joining the housing upper and lower parts. It is to be ensured that, when loading the housings, the connecting bolts and holding down bolts are tightened correctly.Main Dimensions Shaft Dia di: 35mm(1-1/4 inch) D(H8): 80mm a: 205mm b: 60mm c:25mm g(H12):33mm Shaft Center Height (h)(h12):60mm L:85mm L1:90mm W:110mm n:30mm Mount Hole Center To Center(m):170mm S:M12 u:15mm V:20mm X:26mm d2(H12):36.5mm d3(H12):48mm fi(H13): 4mm f2:5.4mm
SN508 plummer block are made of Grey cast iron,it working with 22208CKBearing,1208K Bearing and 2208K bearing This kind of plummer block is easy installation, SN508 plummer block housing are robust,ready-to-mount unit that are assembled,lubricated and sealed ,with their simple and safe installation,easy alignment and reliable locking technology,they are an excellent alternative to sleeve-mounted bearing in housings SN508 plummer block enable the bearings to achieve maximum bearing service life with less need for maintenance . Applications of SN508 plummer block housing General industry: Conveyors,Roller tables,Fans and blowers Processing industry: Crushers,hammer mills,ball and rod mills,decanters,kilns Paper making equipment:dryer cans,jack ladders,chip conveyers,pumps,pulpers breast rolls,press rolls Loadability of the Housings SN Plummer Block Housings are designed for loads applied vertically to the bridging surface. In these instances the permissible load is determined by the load rating of fitted bearing. Should loads be applied at other angles, checks should be carried out to determine whether they are still valid for the housing, the housing connecting bolts and the mounting bolts. housings from material GGG 40 & GS 45.Bolts to strength class 8.8 are supplied as standard for joining the housing upper and lower parts. It is to be ensured that, when loading the housings, the connecting bolts and holding down bolts are tightened correctly.Main Dimensions Shaft Dia di: 35mm(1-1/4 inch) D(H8): 80mm a: 205mm b: 60mm c:25mm g(H12):33mm Shaft Center Height (h)(h12):60mm L:85mm L1:90mm W:110mm n:30mm Mount Hole Center To Center(m):170mm S:M12 u:15mm V:20mm X:26mm d2(H12):36.5mm d3(H12):48mm fi(H13): 4mm f2:5.4mm 
