Main Dimensions Diameter under rollers(Fw):25mm Outer diameter(D):32mm Width(C): 20mm Tolerance of Width:-0.3mm to 0mm Chamfer dimension drawn cup (outer ring)(r min.) :0.8mm Dynamic load ratings(Cr): 18.91KN Static load ratings(Cor):31.35KNThe drawn cup of hardened steel and the needle roller and cage assembly of these bearings form a nonseparable unit. The outer ring of drawn cup needle roller bearing is punched with the high-quality steel sheet. The outer ring has thin wall. The drawn cup needle roller bearing has the characteristics of small radial section area, large load carrying capacity, less inertia and economic manufacture. It is suitable for small section height, or when the housing bore isn't used for raceway, this type is recommended to use. The bearing is assembled into the housing bore under a certain pressure without further axial location. The drawn cup needle roller bearing generally takes its shaft diameter as the internal raceway. The drawn cup needle roller bearing has two structures-with retainer and with full of needles. They are divided into opened type and close-end type. The structure with retainer has the single seal ring and double seal ring. The structure with full of needles has a large load carrying capacity.Material:52100 Chrome Steel Construction:Single Row Seal Type:Open Limiting Speed:16300rpm Inner ring IR series :IR 20x25x20.5 Inner ring LR series:LR 20x25x20.5 Weight:0.038 kg
Features of Drawn cup needle roller bearings
Low cross section. In applications where less space is available, drawn cup needle roller bearings enable downsizing. High load carrying capacity and stiffness. Owing to their large number of rollers, drawn cup needle roller bearings have a high load carrying capacity and stiffness. Good running properties.
Material:52100 Chrome Steel Construction:Single Row Seal Type:Open Limiting Speed:16300rpm Inner ring IR series :IR 20x25x20.5 Inner ring LR series:LR 20x25x20.5 Weight:0.038 kg
